[ Pobierz całość w formacie PDF ]
How to flash window 10 for Chuwi vi10 ultimate
Notice:
The battery level should be more than 50% before flashing the system
The USB flash disk needs to make the startup disk firstly, the link for downloading the startup disk files:
Flashing tools:
8GB U Disk, USB-OTG Cable and HUB (over 3 interfaces) the USB interface keyboard as follows:
U stick+USB+Deconcentrator+ USB keyboard
The first step:
The tablet is in off mode and its battery level must be guaranteed no less than 50%.
Please format the USB flash disk that succeeds in making the startup disk into the format of FaT32, and then rename it as “WINPE”
Please unzip the image file
It’d better close the antivirus software before unzipping the image files to avoid that the applications in files are deleted.
The second step:
Please copy the image file unzipped to the Root directory of the U disk (U disk format: FAT32,named “WINPE”)
The Tablet connects Hub cable and plug the Hub in keyboard as the picture shows:
The third step:
Please press the power button of the tablet. At the same time, click “F7”of the keyboard continuously. And then you will enter the Flashing mode.
Choose the first row to flash the system automatically.
Press “Enter” button to program. When the programming is finished, the tablet will shut off automatically
The programming will last about 5 to 10 minutes; the precise time is dependent of Hub and U disk. The introduction is on basis of using the U disk 3.0. High-speed programming lasts about 5 minutes.
[ Pobierz całość w formacie PDF ]